Skip to main content
HomeLaser ScreedLaser GradingPlace & FinishSoff CutVaccum and CuringFor SaleContact
How a Laser Screed Works
3D Laser Screed
Screed Specifications

S-240 Laser Screed Specifications

Overall Width 7'-8" Outside of Tires (2.34 m)
14'-1" at Screed Head (4.29 m)
Overall Length 18'-3" Boom In (5.56 m)
36'-1" Boom Out (11.0 m)
28'-5" Transport (8.66 m)
Overall Height 8'-3" (2.51 m)
Weight (nominal) 15,100 lbs. (6850 kg)
Boom Reach 20 ft. (6.1 m)
Screed Width 12 ft. (3.66 m)
Screed Area Per Pass 240 sq. ft. (22.3 m2)
Fuel Capacity 27 gallons (102 l)
Hydraulic Oil Capacity 27 gallons (102 l)
Upper Frame Rotation 360 degrees
Vehicle Stabilizers 4 hydraulically-operated stabilizer pads
Drive Train Hydraulic-powered four wheel drive
Axles - Two Drive Steer Type
Operating Modes 2 Wheel, 4 Wheel, Crab Steer
Tires/Wheels 35" 12 ply / 16" rims
Maximum Speed 3.6 MPH (5.8 kpH)
Engine Type 4 Cyl., 4 stroke, direct-injection, liquid cooled diesel 199 cu. in. (3.26 l)
Horse Power 65 HP @ 2600 rpm (48.5 kW)
Miscellaneous Features 12 volt, key on & off, cold start aid, hand-actuated throttle with electric shutoff
Laser Type 2 independently mounted laser receivers with on-board computer control panel. Continuous elevation monitoring at a rate of 10 times per second.
Screed Type Hydraulic powered laser controlled screeding head mounted on a telescopic boom. Self-leveling screed head consists of a plow that removes excess concrete, an auger that cuts concrete to grade, and a vibrator that consolidates material at 3000 VPM.

D&D Laser Screed
561 Birch Street
Lake Elsinore, CA 92530
Phone: (951) 245-3595

Site Powered By
    EZWebSites.BIZ site creator
    Online web site design